Poulan 545137280 Manuel d'utilisateur télécharger pdf (Page 6)

6

Handlebar

EDGER SAF ET Y

WARNING: Inspect the area to be

edged before each use. Remove objects

(rocks, broken glass, nails, wire, etc.) which

can be thrown by the blade or can wrap

around the shaft.

S Blade rotates momentarily after the trigger

is released. The blade can seriously cut

you or others.

S Allow blade to stop before removing it from

the cut.

S Throw away blades that are bent, warped,

cracked, broken or damaged in any other

way. Replace parts that are cracked,

chipped, or damaged before using the unit.

S Do not attempt to remove cut material nor

hold material to be cut when the engine is

running or when cutting blade is moving.

S Always keep the wheel and depth adjusting

skid in contact with the ground.

S Always push the unit slowly over the

ground. Stay alert for uneven sidewalks,

holes in the terrain, large roots, etc.

S Always use the handlebar when using edg-

er attachment.

BLOWER/VACUUM SAFETY

WARNING: Inspect area before

starting unit. Remove all debris and hard ob-

jects such as rocks, glass, wire, etc. that can

ricochet, be thrown, or otherwise cause injury

or damage during operation.

S Do not set unit on any surface except a

clean, hard area while engine is running.

Debris such as gravel, sand, dust, grass,

etc., could be picked up by the air intake

and thrown out through discharge opening,

damaging unit, property, or causing serious

injury to bystanders or operator.

S Never place objects inside the blower

tubes, vacuum tubes or blower outlet. Al-

ways direct the blowing debris away from

people, animals, glass, and solid objects

such as trees, automobiles, walls, etc. The

forceof air can causerocks, dirt,or sticks to

be thrown or to ricochet which can hurt

people or animals, break glass, or cause

other damage.

S Never run unit without the proper equip-

ment attached. When using your unit as a

blower, always install blower tubes.

S Check air intake opening, blower tubes or

vacuum tubes frequently, always with en-

gine stopped and spark plug disconnected.

Keep vents and discharge tubes free of de-

bris which can accumulate and restrict

proper air flow.

S Never place any object in air intake opening

as this could restrict proper air flow and

cause damage to the unit.

S Never use for spreading chemicals, fertiliz-

ers, or other substances which may contain

toxic materials.

S To avoid spreading fire, do not use near leaf

or brush fires, fireplaces, barbecue pits,

ashtrays, etc.

BRUSHCUTTER SAFETY

DANGER: Blade can thrust violently

away from material it does not cut. Blade

thrust can cause amputation of arms or legs.

WARNING: Do not use trimmer head

as a fastening device for the blade.

WARNING: The blade continues to

spin after the throttle is released or engine is

turned off. The coasting blade can throw ob-

jects or seriously cut you if accidentally

touched. Stop the blade by contacting the

right hand side of the coasting blade with ma-

terial already cut.

Stop coasting

blade by contact

with cut material.

WARNING: Inspect the area to be

cut before each use. Remove objects (rocks,

broken glass, nails, wire, etc.) which can be

thrown or become entangled in the blade or

trimmer line.

1 2 3 4 5 6 7 8 9 10 11 ... 20 21

Commentaires sur ces manuels

Pas de commentaire