Poulan 193747 Manuel d'utilisateur Page 12

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 24
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 11
12
ASSEMBLE REMOTE
THROTTLE CONTROL TO
ENGINE (ON MODELS SO
EQUIPPED)
(USE HARDWARE GROUP “E”)
NOTE: If your lawn mower does not have
a remote throttle control, go on to
“ASSEMBLE ENGINE ZONE CONTROL
CABLE TO ENGINE”.
First, move lever on remote throttle
control to the CHOKE (if equipped) or
FAST/START position.
CHOKE
FAST / START
Determine the manufacturer and brand or
type engine on your lawn mower and fol-
low the appropriate in struc tions that follow.
MODELS WITH BRIGGS & STRATTON
CLASSIC OR SPRINT AND MODELS
WITH TECUMSEH ENGINES:
NOTE: Tecumseh engines have cable
mounting clamp and screw preassembled
on engine.
At en gine carburetor, insert wire “Z”
bend of throttle control into hole of
speed lever (use inner hole on Briggs &
Stratton engine).
(Briggs & Stratton only) Assemble di-
ecast clamp and #10 x 5/8 screw loosely
to engine.
Position throttle cable under clamp and
push cable towards speed lever until speed
lever touches boss. Hold cable at this po-
sition and tighten clamp screw securely.
MODELS WITH BRIGGS & STRATTON
QUANTUM ENGINES:
Slide throttle lever on engine to CHOKE
position (away from spark plug). Push
gently beyond fi rst stop to lock in detent
(CHOKE position).
Insert wire “Z” bend of throttle cable into
throttle lever hole from top side.
Secure throttle cable to engine with
diecast clamp and #10 x 5/8 hex head
screw and tighten securely.
(BRIGGS & STRATTON ENGINE SHOWN)
(Clamp and Screw are preassembled on
Tecumseh engines)
BRIGGS & STRATTON CLASSIC AND
SPRINT EN GINES:
Attach throttle cable to side of en gine
housing with cable clip and #10 x 5/8 hex
washer head screw. Tight en securely.
Diecast
clamp
#10 x 5/8
Hex head screw
Speed lever
Cable clip
Throttle
cable
#10 x 5/8
Hex head screw
Throttle
lever
Hex
Head
Screw
#10 x 5/8
Diecast clamp
Throttle cable
Vue de la page 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Commentaires sur ces manuels

Pas de commentaire