Poulan PLN1510 Manuel d'utilisateur télécharger pdf (Page 5)

A. GRIP SAW FIRMLY; Hold the cha

in saw firmly with both hands when

the motor is running. Keep a good

firm grip on the saw with both

hands, the right hand on the rear

handle, and the left hand on the

front handle.

B. Do not over reach.

C. Keep proper footing and balance

at all times.

D. Do not Set the nose of the guide

bar contact a log, branch, ground

or other obstruction.

E. Do not cut above shouider height,

F. Use devices, such as low-kickback

chain, guide bar nose guards, ch

ain brakes and special guide bars,

which reduce the risks associated

with kickback.

G. Use only replacement bars and

chains specified by the

manufacturer or the equivalent.

20. POWER SUPPLY: Connect the

chain saw to correct voltage; be

sure that the voltage supplied is

the same as that specified on the

nameplate of the tool.

21. DO NOT operate a chain saw that

is damaged, improperly adjusted,

or not completely and securely

assem- bled. Be sure that the saw

chain stops moving when the

trigger is released,

22. DO NOT attempt operations bey

ond your capacity or experience.

23. DO NOT operate a chain saw with

one hand! Serious injury to the

operator, helpers, or bystanders

may result from one-handed

operation. A chain saw is intended

for fwo-handed use.

24. TO REDUCE potential for electric

shock, do not operate the saw on

wet or slippery surfaces, or during

snow storms, rain storms, and

other adverse weather conditions.

25. DO NOT allow dirt, debris or sawd

ust to build up on the motor or

outside air vents.

26. Follow the manufacturer’s sharpen

ing and maintenance instructions

for the saw chain,

27. Cut at high motor speeds.

28. Operation of a chain saw should be

restricted to mature, properly

instructed individuals.

29. Your chain saw is intended for

occasional homeowner use. it is

not made for heavy continuous

use.

30. DO NOT FORCE a small saw to do

a job requiring a heavier duty unit.

31. EXAMINE THE ELECTRICAL

SWITCHES. Do not use the chain

saw if the switches do not properly

turn on and off. Do not attempt to

make any repairs to the electric

switches. Take your saw to a

Pouian Authorized Service Center.

32. MAINTAIN EXTENSION CORDS,

Inspect the extension cords perio

dically and replace if damaged.

Only use power cords that are

suitably marked for ouldooruse,

33. DO NOT OPERATE YOUR CHAIN

SAW near or around flammable

liquids or gases, whether in or out

of doors. An explosion and/or fire

may result.

34. This electric powered saw is

intend- ed for infrequent use by

home own- er's, cottagers and

campers, and for suchgeneral

applications such as clearing,

pruning, cutting firewood, etc. It is

not intended for prolonged use. If

the intended use involves

prolonged periods of ope- ration,

this may cause circulatory

problems in the user's hands due

to vibration. It may be appropriate

touse a saw having an

anti-vibration feature,

35. NEVER REMOVE, modify or make

inoperative any safety device

furnished with your unit.

36. Safety clothing required by your

safety organizations, government

regulations, or your employer

should be used; otherwise, snug

fitting clothing, safely footwear

safety chap, and hand and ear

protection should be worn.

37. When felling, keep at least two{2)

tree lengths between yourself and

your fellow workers.

38. All chain saw service, other than

the items listed in the user manual

safety and maintenance instructio

ns, should be performed by

compe- tent chain saw personnel.

Do not attempt to repair it yourself;

there are no user serviceable parts

inside.

NOTE: Low-kickback saw chain has met

thekickback performance requirements

of ANSI B175.1'1991and is in accorda

nce with CSA Z62.3. Do not use other

replacement chain unless it has met

these requirements for your specific

model,

39. DO NOT USE ANY OTHER CUTT

ING ATTACHMENT OR ACCESS

ORIES, Use only Pouian replacem

ent parts and accessories, which

are designed specifically to enhan

ce the performance and maximize

the safe operation of our products.

Failure to do so may cause poor

performance and possible injury.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Poulan PLN1510 Manuel d'utilisateur Page 5

Commentaires sur ces manuels