Poulan 187881 Manuel d'utilisateur télécharger pdf (Page 7)

ASSEMBLY / PRE-OPERATION

CHECK TIRE PRESSURE

The tires on your snow thrower were overinﬂ ated at the fac-

tory for shipping purposes. Correct and equal tire pres sure

is important for best snow throwing performance.

• Reduce tire pressure to 14-17 PSI.

INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD

(See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may

be used to install the chute rotater head.

1. Place discharge chute assembly on top of chute base

with discharge opening toward front of snow thrower.

2. Position chute rotater head over chute bracket. If nec-

es sary, rotate chute assembly to align square and pin

on un der side of chute rotater head with holes in chute

brack et.

3. With chute rotater head and chute bracket aligned,

po si tion chute rotater head on pin and threaded stud

of mounting bracket.

4. Install 3/8 washer and locknut on threaded stud and

tighten securely.

CHUTE

ROTATER

HEAD

3/8 WASHER

3/8 LOCKNUT

THREADED

STUD

ROTATER HEAD

MOUNT ING

BRACKET

CHUTE

BRACKET

FIG. 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Pas de commentaire

Poulan 187881 Manuel d'utilisateur Page 7