Poulan 404172 Manuel d'utilisateur télécharger pdf (Page 7)

ASSEMBLY

- Pivot bar towards you and insert other end of bar

into hole in rear mower bracket (D). Move mower as

needed to insert bar.

- Secure with washer and retainer spring as shown

using small 5/16 retainer spring.

NOTE: Be sure mower side suspension arms (A) are point-

ing forward before sliding mower under tractor.

• Slide mower under tractor until it is centered under

tractor.

• FIRST INSTALL ANTI-SWAY BAR (S).

- From right side of mower, insert anti-sway bar into

hole in transmission bracket (T).

02995

02996

FIG. 6

FIG. 7

• ATTACH MOWER SIDE SUSPENSION ARMS (A) TO

CHASSIS - Position hole in arm over pin (B) on outside

of tractor chassis and secure with washer and retainer

spring.

• Repeat on opposite side of tractor.

FIG. 8

FIG. 10

• ATTACH REAR LIFT LINKS (C) - Insert rod end of lift

link assembly into hole in tractor lift shaft suspension

arm (L) and pivot link down to mower. Lift rear corner

of mower and position slot in link assembly over pin on

rear mower bracket (D) and secure with washer and

retainer spring.

• Repeat on opposite side of tractor.

FIG. 9

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Pas de commentaire

Poulan 404172 Manuel d'utilisateur Page 7