Poulan PPB4000C Manuel d'utilisateur télécharger pdf (Page 8)

8. Insert a small screwdriver into aligned

holes. This will keep the shaft from turn-

ing while tightening the blade nut.

Screwdriver

9. Tighten blade nut firmly with a wrench

while holding screwdriver in position.

10. Remove the screwdriver .

11. T urn blade by hand. If the blade binds

against the shield, or appears to be un-

even, the blade is not centered, and you

must reinstall.

NOTE:

To rem o ve blade, inse rt scr e w driver

into aligned holes. Unthread the nut and remove

parts. Be sure to store parts and instructions for

future use.

OPERATION

KNOW YOUR BRUSHCUTTER ATTACHMENT

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR

BRUSHCUTTERATTACHMENT. Comparethe illustrations with your unit to familiarize yourself

with the location of various controls and adjustments. Save this manual for future reference.

Blade Shield

Blade

Gearbox

Shaft

Hanger

Trimmer Shield

Trimmer Head

BLADE

The BLADE is designed for cutting grass,

weeds, and brush up to 1/2 inch (1 cm) in

diameter.

TRIMMER HEAD

TheTRIMMERHEAD holds cutting line and is

designed for cutting grass and light weeds.

BLADE SHIELD

TheBLADE SHIELD provides protection from

the spinning blade.

TRIMMER SHIELD

The TRIMMER SHIELD provides protection

from the spinning trimmer line.

OPERATING THE COUPLER

Your powerhead is equipped with a coupler

which enables optional attachments to be

installed. The optional attachments are:

MODEL:

Edger

PPB1000E.......................

Cultivator

PPB2000T...................

Blower

PPB3000B......................

W ARNING:

Always disconnect pow-

erhead spark plug before removing or instal-

ling attachments.

REMOVING BRUSHCUTTER

ATTACHMENT (OR OTHER

OPTIONAL ATTACHMENTS)

CAUTION:

When removing or installing at-

tachments, place the powerhead and attach-

ment on a flat surface for stability.

1. Loosen the coupler by turning the knob

counterclockwise.

Coupler

Knob

LOOSEN

TIGHTEN

Upper Shaft

Lower

Attachment

2. Press and hold the locking/relea se button.

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Poulan PPB4000C Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Poulan PPB4000C