Poulan 530164830 Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Outils Poulan 530164830. Poulan 530164830 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 9
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
ENGLISH ESPAÑOL
FRANÇAIS
DANGER:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury .
PELIGRO:
Lea el manual de instrucciones y siga todas las advertencias e
instrucciones de seguridad. El no hacerlo puede resultar en le-
siones graves.
DANGER:
Lire le manuel d’instructions et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le
faire pourrait entraîner des blessures graves.
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions
PP4000C
Electrolux Home Products, Inc.
104 W arren Road
Augusta, GA 30907
Copyright E2004 Electrolux Home Products, Inc. 530164830 1/22/04
NOT DESIGNED FOR USE WITH
ELECTRIC POWERHEADS
NO ESTA DISEÑADO PARA EL USO CON
CABEZAS DE MOTOR ELÉCTRICO
NON CONÇU POUR L’USAGE AVEC
BLOC--MOTEURS ÉLECTRIQUES
R
Vue de la page 0
1 2 3 4 5 6 7 8 9

Résumé du contenu

Page 1 - Manuel d’Instructions

ENGLISH ESPAÑOLFRANÇAISDANGER:Read and follow all Safety Rules and Operating Instructions beforeusing this product. Failure to do so can result in ser

Page 2 - SAFETY RULES

2IDENTIFICATION OF SYMBOLSDANGER! This brushcuttercan be dangerous! Careless orimproper use can causeserious or even fatal injury.Read and understand

Page 3 - WARNING: Disconnect powerhead

3Stop coastingblade by contactwith cut material.OPERATOR SAFETYS Dress properly . Always wear safety glassesor similar eye protection when operating,

Page 4 - ASSEMBLY

4SPECIAL NOTICE:Exposure to vibrationsthrough prolonged use of gasoline poweredhand tools could cause blood vessel or nervedamage in the fingers, hand

Page 5

53. Secure the mounting bracket by tighten-ing the screws with the hex wrench.4. Locate the decal on the handlebar. Thisdecal includes an arrow. Posit

Page 6 - OPERATION

6OPERATIONKNOW YOUR BRUSHCUTTER ATTACHMENTREAD THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOU RBRUSHCUTTER A TTACHMENT. Compare the ill

Page 7

7INSTAL L ING ATTACHMENTHANGERAn attachment hanger is provided for storagewhen attachment is not in use. To install hang-er on attachment:1. Remove th

Page 8 - MAINTENANCE

8Cut using the 2o’clock to 4 o’clockposition of theblade2 o’clock4 o’clockRECOMMENDED CUTTING POSITIONWARNING: The operator or othersmust not try to c

Page 9 - LIMITED WARRANTY

96. Place the cupped washer onto the shaft.Make sure the cupped side of the washeris toward the blade.7. Install blade nut by threading onto theshaft

Modèles reliés PP4000C

Commentaires sur ces manuels

Pas de commentaire