Poulan PLN1514 Manuel d'utilisateur télécharger pdf (Page 3)

2 - SAFETY PRECAUTIONS

SAFETY PRECAUTIONS FOR CHAIN SAW USERS

WARNING

2-1. DANGER! BEWARE OF

KICKBACK!

Kickback can lead to dangerous loss of

control of the chain saw and result In

serious or fatal injury to the saw

operator or to anyone standing dose

by. Always be alert, rotational kickback

and pinch kickback are major chain saw

operational dangers and the leading

cause of most chain saw accidents.

BEWARE OF;

ROTATIONAL KICKBACK

(Figure 2-1A)

A = Kickback path

B = Kickback reaction zone

THE PUSH (PINCH-KiCKBACK) AND

PULL REACTIONSfFigure 2-1B)

A = Pull

B = Solid objects

C = Push

KICKBACK may occur when the NOSE

or TIP of the guide bar touches an

object, or when wood doses in and

pinches the saw chain in the cut.

Tip contact in some cases may

cause a lightning-fast reverse reaction,

kicking the guide bar up and back

toward the operator.

PINCHING the saw chain along the

BOTTOM of the guide bar may PULL

the saw forward, away from the

operator.

PINCHING the saw chain along the

TOP of the guide bar may PUSH the

guide bar rapidly back toward the

operator.

Any of these reactions may cause you to

lose control of the saw, which could

result in serious personal injury.

2-2. IMPORTANT SAFETY

INSTRUCTIONS

WARNING

When using an electric chain saw, basic

safety precautions should always be

followed to reduce the risk of fire,

electric shock, and injury to persons,

including the following:

READ ALL INSTRUCTIONS

1. Double insulated - No Serviceable

Parts Inside.

2. To reduce the risk of electric shock,

this equipment has a polarized plug

(one blade is wider then the other).

This plug will fit in a polarized outlet

only one way.if the plug does not fit

fully in the outlet, reverse the plug,If

it still does not fit, contact a qualified

electrician to install the proper outlet.

Do not change or alter the plug in

any way.

3. With a basic understanding of kick-

back, you can reduce or eliminate

the element of surprise. Sudden

surprise contributes to acciderjts.

4. KEEP THE WORK AREA CLEAN:

Cluttered areas invite injuries.Do not

start cutting until you have a clear

work area, secure footing, and a

planned retreat path from the falling

tree,

5. GUARD AGAINST ELECTRIC

SHOCK: Prevent body contact with

grounded surfaces (i.e., metal pipes,

wire fences),

6. CONSIDER THE WORK AREA

ENVIRONMENT: Use extreme

caution when cutting small sized

brush and sapling, as slender

material may catch the saw chain

and be whipped toward you or pull

you off balance,Do not operate a

chain saw in a tree unless you are

specifically trained to do so.When

cutting a limb that is under tension,

be alert for spring back so that you

will not be struck when the tension in

the wood fibers is refeased.Do not

expose the chain saw to rain.Do not

1 2 3 4 5 6 7 8 ... 12 13

Commentaires sur ces manuels

Pas de commentaire