Poulan 1420 Manuel d'utilisateur télécharger pdf (Page 14)

14

Cutters

Depth Gauge

Drive Links

6. Slide the chain between the housing

and the sprocket. Place chain

around the sprocket and fit the drive

links into the guide bar groove and

then around guide bar nose.

Right Housing

Bar

Sprocket

7. Hold the guide bar against the s aw

frame and install the bar clamp plate.

Be sure the tab on the bar clamp

plate is toward the rear of bar.

Bar

Clamp

Plate

Adjusting Pin Slot

Bar Nuts

Tab

8. Secure the guide bar and bar c lamp

plate with the bar nu ts; tighten finger

tight only.

CAUTION: If saw chain is installed

backwards, the saw will v ibrate exces-

sively and will not cut wood.

CHAIN ADJUSTMENT

See

CHECK CHAIN TENSION in the MAIN-

TENANCE

section.

CUSTOMER SERVICEABLE PARTS

WARNING: Use of any other ac-

cessory or attachment might present a

risk of injury to the operator.

Bar Mounting Nuts 530015251

Oil Cap 530029282

Guide Plate 530029285

Safety Lock Button 530025873

Bar Adjusting Screw 530015514

Bar Adjusting Pin 530023492

Spacer 530015832

Spacer Screw 530015835

File (5/32″ dia.) T win Pak 952055085

Xtra GUARD® Chain --14″ 952051209

Xtra GUARD® Chain -- 16″ 95205121 1

Lo--Kick® Guide Bar -- 14″ 952044368

Lo--Kick® Guide Bar -- 16″ 952044370

Bar & Chain Lubricant --1 qt. 952030129

Bar & Chain Lubricant --1 gal. 952030130

REPLACEMENT PART PART NO.

STORAGE

WARNING: Perform the following

steps after each use:

S Allow the motor to coo l before storing

or transporting.

S Store chain saw and extension cord in

a well ventilated area

S Store chain saw with all guards in

place and position chain saw so that

any sharp object cannot accidentally

cause injury.

S Store chain saw unplugged, well out of

the reach of children.

SEASONAL STORAGE

Prepare your un it for storage at the

end of the season or if it will not be

used for 30 d ays or more.

If your chain saw is to be stored for a

peri od of time:

S Clean it thoroughl y befor e lengthy stor-

age.

S Stor e in a clean dry area.

S Lightly oil external metal surfaces and

guide bar.

S Oil the chain and wrap it in heavy pa-

per or cloth.

S Use bar sheath to cover bar.

1 2 ... 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire