Poulan 115270726 Manuel d'utilisateur télécharger pdf (Page 8)

8

jects or seriously cut you if accidentally

touched. Stop the blade by contacting the

right hand side of the coasting blade with ma-

terial already cut.

WARNING: Inspect the area to be

cut before each use. Remove objects (rocks,

broken glass, nails, wire, etc.) which can be

thrown or become entangled in the blade or

trimmer line.

S Throw away and replace blades that are

bent, warped, cracked, broken or damaged

in any other way.

S Install required shield properly before using

the unit. Use the metal shield for all metal

blade use.

WARNING: Only use brushcutter at-

tachments that provide a metal shield with

proboscis nose.

Proboscis

nose

S Use only specified blade and make sure it is

properly installed and securely fastened.

S Cut from your left to your right. Cutting on

the right side of the shield will throw debris

away from the operator.

S Always use the handlebar and a properly

adjusted shoulder strap with blade (see AS-

SEMBLY instructions in brushcutter attach-

ment instruction manual).

CULTIVATOR SAF ETY

WARNING: Rotating tines can cause

serious injury . Keep away from rotating tines.

Stop the engine and disconnect the spark plug

before unclogging tines or making repairs.

WARNING: Inspect the area to be

cultivated before starting the unit. Remove all

debris and hard and sharp objects such as

rocks, vines, branches, rope, string, etc.

S Avoid heavy contact with solid objects that

might stop the tines. If heavy contact oc-

curs, stop the engine and inspect the unit

for damage.

S Never operate the cultivator without the tine

cover in place and properly secured.

S Keep the tines and guard clear of debris.

S After striking a foreign object, stop the engine,

disconnect the spark plug and inspect the cul-

tivator for damage. Repair before restarting.

S Disconnect attachment from the drive en-

gine before cleaning the tines with a hose

and water to remove any build--up. Oil the

tines to prevent rust.

S Always wear gloves when servicing or

cleaning the tines. The tines become very

sharp from use.

S Do not run unit at high speed unless culti-

vating.

HEDGE TRIMMER SAFETY

DANGER: RISK OF CUT; KEEP

HANDS AWAY FROM BLADE -- Blade

moves momentarily after the trigger is re-

leased or engine is turned off. Do not attempt

to clear away cut material when the blade is in

motion. Make sure engine is stopped, the

spark plug wire is disconnected, and the

blade has stopped moving before removing

jammed material from the cutting blade. Do

not grab or hold the unit by the cutting blade.

WARNING: Inspect the area before

starting the unit. Remove all debris and hard

objects such as rocks, glass, wire, etc. that

can ricochet, be thrown, or otherwise cause

injury or damage during operation.

S Do not use a cutting blade that is bent,

warped, cracked, broken or damaged in any

other way. Have worn or damaged parts re-

placed by your authorized service dealer.

S Always keep unit in front of your body.

Keep all parts of your body away from the

cutting blade.

S Keep the cutting blade and air vents clear of

debris.

SNOW THROWER SAFETY

WARNING: Keep hands and feet

away from the rotor when starting or running

the engine. Never attempt to clear the rotor

with the engine/motor running. Stop engine

and disconnect spark plug before unclogging

snow or debris from discharge chute or when

adjusting vanes.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Commentaires sur ces manuels

Pas de commentaire