Poulan VF550 Manuel d'utilisateur télécharger pdf (Page 13)

TILLER

Fig. 16

Fig. 17

Fig. 19

CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come into

contact with plug.

TINE ARRANGEMENT

Your outer tines can be assembled in several different ways

to suit your tilling or cultivating needs.

CAUTION: Tines are sharp. Wear gloves

or other protection when han dling tines.

tine_4

OUTER

TINE

INNER TINE

HAIRPIN CLIP

CLEVIS

MID-WIDTH TILLING - 22" PATH (See Fig. 17)

• Assemble holes “A” in tine hubs to holes “C” in tine shaft.

tine_5

NORMAL TILLING - 24" PATH (See Fig. 16)

• Assemble holes “A” in tine hubs to holes “B” in tine shaft.

Fig. 18

NARROW TILLING/CULTIVATING - 13" PATH

(See Fig. 18)

• Remove outer tines.

tine_6

INNER TINES ONLY

NOTE: When reassembling outer tines, ensure right tine

assembly (marked “R”) and left tine assembly (marked “L”)

are mounted to correct side of tine shaft.

TO REMOVE CLUTCH HOUSING/ENGINE

ASSEMBLY (SEE FIG. 19)

• Drain engine oil and gasoline out of engine.

• Remove (5) carriage bolts and (5) lock nuts attaching

the clutch housing and tine shield to transmission.

• Remove clutch housing/engine assembly and lay on

ground (engine is upside down).

TO CHECK TINE OPERATION

• Start engine, tip tines off ground by pressing handles

down and engage tine control to start tine rotation.

• Verify tines spin properly.

• Allow tines to rotate for five minutes.

CARRIAGE

BOLTS

SERVICE AND ADJUSTMENTS

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Poulan VF550 Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Mini-faucheuses Poulan VF550