Poulan 545117550 Manuel d'utilisateur télécharger pdf (Page 16)

STORAGE

WARNING: Perform the following

steps after each use.

S Stop the unit and disconnect the power

source when not in use.

S Carry the unit with motor stopped.

S Allow motor to cool before storing or trans-

porting.

S Store unit and extension cord indoors in a

high, dry place out of the reach of children.

Store unit unplugged.

S Store pruner with all guards in place and posi-

tion pruner so that any sharp object cannot

accidentally cause injury.

SEASONAL STORAGE

Prepare your unit for storage at the end of the

season or if it will not be used for 30 days or

more.

If your unit is to be stored for a period of time:

S Clean it thoroughly before lengthy storage.

S Store in a clean dry area.

S Lightly oil external metal surfaces and guide

bar .

S Oil the chain and wrap it in heavy paper or

cloth.

TROUBLE CAUSE REMEDY

Chain does

not move

when trigger

switch is

engaged.

1. Chain tension incorrect.

2. Guide bar rails pinched.

3. Trigger switch failure.

4. Circuit breaker tripped/

fuse failure.

1. See “Check Chain Tension” in

Maintenance section.

2. Repair or replace.

3. Contact an authorized service

dealer.

4. Reset circuit breaker or replace fuse.

Chain clatters

or cuts

roughly.

1. Chain tension incorrect.

2. Cutters damaged.

3. Chain worn.

4. Cutters dull, im properly

sharpened, or depth

gauges too high.

5. Sprocket worn.

1. See “Check Chain Tension” in

Maintenance Section.

2. Contact an authorized service

dealer.

3. Resharpen or replace chain.

4. See “Chain Sharpening” in

Service and Adjustments section.

5. Contact an authorized service

dealer.

1. Chain cutter tops not

filed flat.

2. Guide bar burred or

bent; rails uneven.

Chain stops

during cut.

1. See “Chain Sharpening” in

Service and Adjustments section.

2. Repair or replace guide bar.

Oil inadequate

for bar and

chain lubrica-

tion.

1. Oil tank empty.

2. Oil outlet clogged.

3. Guide bar oil hole

blocked.

1. Fill oil tank.

2. Contact an authorized service

dealer.

3. Remove bar and clean.

Chain cuts at

an angle.

WARNING: Always stop unit and disconnect from the power source before per-

forming all of the recommended remedies below except remedies that require unit to be

operating.

1. Cutters damaged on

one side.

2. Chain dull on one side.

3. Guide bar bent or worn.

1. See “Chain Sharpening” in

Service and Adjustments section.

2. See “Chain Sharpening” in

Service and Adjustments section.

3. Replace guide bar.

TROUBLESHOOTING TABLE

1 2 ... 11 12 13 14 15 16 17

Commentaires sur ces manuels

Pas de commentaire

Poulan 545117550 Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Mini-faucheuses Poulan 545117550