Poulan 156235 Manuel d'utilisateur télécharger pdf (Page 8)

02092

SUPPORT POST (See Fig. 3)

Use Hardware - - GROUP "B"

1. Rotate cover assembly onto its side as shown.

2. Assemble support post to container support with

the three (3) carriage bolts and locknuts. Tighten

securely.

ALIGNMENT

MARKS

COVER SEAL

FIG. 2

COVER SEAL (See Fig. 2)

No hardware required

1. Align mark on seal with mark at cover opening.

2. Work seal into opening so cover sits between ﬂ anges

of seal.

LOCKNUTS

CARRIAGE

BOLTS

SUPPORT

POST

FIG. 3

MOUNTING TO TRACTOR (See Fig. 4)

Use Hardware - - GROUP "C & D"

NOTE: For ease of assembly, you may wish to obtain the

as sis tance of another person for mounting assembly to

tractor.

1. Raise seat on tractor to allow assembly to be

mounted.

2. With cover closed, lift assembly and place support

post inside mounting bracket. Allow assembly to rest

on lanced tabs of mounting bracket.

3. Line up holes in mounting bracket with holes in support

post and insert bracket support pin. Secure with retainer

spring.

4. Unlatch and open cover.

5. Secure cover assembly to support tube using short hex

bolt, long hex bolt, and locknuts as shown. Tighten all

hardware securely.

NOTE: Hardware securing support tube to drawbar must

be tightened at this time.

6. Install the four (4) tubing end caps onto container

support. Tap each end cap onto container support

tubes to seat securely.

RETAINER

SPRING

LANCED TABS

COVER ASSEMBLY

FIG. 4

LOCKNUTS

END CAP

SHORT

HEX BOLT

LOCKNUTS

BRACKET

SUPPORT PIN

LONG

HEX BOLT

SHORT

HEX BOLT

LONG

HEX BOLT

SUPPORT TUBE

SUPPORT POST

MOUNTING

BRACKET

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 18 19

Commentaires sur ces manuels

Pas de commentaire

Poulan 156235 Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Tondeuses à gazon Poulan 156235