Poulan 115225426 Manuel d'utilisateur télécharger pdf (Page 6)

6

Handlebar

EDGER SAFETY

WARNING: Inspect the area to be

edged before each use. Remove objects

(rocks, broken glass, nails, wire, etc.) which

can be thrown by the blade or can wrap

around the shaft.

WARNING: Blade rotates momen-

tarily after the trigger is released or engine is

turned of f. The blade can seriously cut you or

others. Allow blade to stop before removing it

from the cut.

S Throw away blades that are bent, warped,

cracked, broken or damaged in any other

way. Replace parts that are cracked,

chipped, or damaged before using the unit.

S Do not attempt to remove cut material nor

hold material to be cut when the engine is

running or when cutting blade is moving.

S Always keep the wheel and depth adjusting

skid in contact with the ground.

S Always push the unit slowly over the

ground. Stay alert for uneven sidewalks,

holes in the terrain, large roots, etc.

BLOWER/VACUUM SAFETY

WARNING: Inspect area before

starting unit. Remove all debris and hard ob-

jects such as rocks, glass, wire, etc. that can

ricochet, be thrown, or otherwise cause injury

or damage during operation.

S Do not set unit on any surface except a clean,

hard area while engine is running. Debris

such as gravel, sand, dust, grass, etc., could

be picked up by the air intake and thrown out

through discharge opening, damaging unit,

property , or causing serious injury to

bystanders or operator .

S Never place objects inside the blower tubes,

vacuum tubes or blower outlet. Always direct

the blowing debris away from people,

animals, glass, and solid objects such as

trees, automobiles, walls, etc. The force of air

can cau se rocks, di r t, or sti cks to be thro wn o r

to ricochet which can hurt people or animals,

break glass, or cause other damage.

S Never run unit without the proper

equipment attached. When using your unit

as a blower, always install blower tubes.

S Check air intake opening, blower tubes or

vacuum tubes frequently, always with

engine stopped and spark plug

disconnected. Keep vents and discharge

tubes free of debris which can accumulate

and restrict proper air flow .

S Never place any object in air intake opening

as this could restrict proper air flow and cause

damage to the unit.

S Never use for spreading chemicals, fertilizers,

or other substances which may contain toxic

materials.

S To avoid spreading fire, do not use near leaf or

brush fires, fireplaces, barbecue pits,

ashtrays, etc.

BRUSHCUTTER SAFETY

DANGER: Blade can thrust violently

away from material it does not cut. Blade

thrust can cause amputation of arms or legs.

WARNING: Do not use trimmer head

as a fastening device for the blade.

WARNING: The blade continues to

spin after the trigger is released or engine is

turned off. The coasting blade can throw ob-

jects or seriously cut you if accidentally

touched. Stop the blade by contacting the left

hand side of the coasting blade with material

already cut.

WARNING: Inspect the area to be

cut before each use. Remove objects (rocks,

broken glass, nails, wire, etc.) which can be

thrown or become entangled in the blade or

trimmer line.

1 2 3 4 5 6 7 8 9 10 11 ... 18 19

Commentaires sur ces manuels

Pas de commentaire