Poulan 190388 Manuel d'utilisateur télécharger pdf (Page 15)

tire_3

TILLER

TO ADJUST HANDLE HEIGHT (See Fig. 22)

Select handle height best suited for your tilling conditions.

Handle height will be different when tiller digs into soil.

• First loosen handle lock lever.

• Handle can be positioned at different settings between

“HIGH” and “LOW” positions.

• Retighten handle lock lever securely after adjusting.

HANDLE LOCK

LEVER

HANDLE (LOW

POSITION)

HANDLE (HIGH

POSITION)

FIG. 22

TIRE CARE

CAUTION: When mounting tires, un-

less beads are seated, over in ﬂ a tion can

cause an explosion.

• Maintain 20 PSI (1.4 kg/cm

) of tire pressure. If tire

pres sures are not equal, tiller will pull to one side.

• Keep tires free of gasoline or oil which can damage

rubber.

TO REMOVE WHEEL (See Fig. 23)

• Place blocks under trans mis sion to keep tiller from

tip ping.

• Remove hairpin clip and clevis pin from wheel.

• Remove wheel and tire.

• Repair tire and reassemble.

FIG. 23

SERVICE AND ADJUSTMENTS

CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come into

contact with plug.

CLEVIS PIN

HAIRPIN CLIP

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21

Pas de commentaire

Poulan 190388 Manuel d'utilisateur Page 15