Poulan BV1650 Manuel d'utilisateur télécharger pdf (Page 6)

-- 6 --

5. Place the hooks of the upper vacuum tube

on the retaining posts of the unit.

6. Pivot the tube until it is secured to the

blower unit by the vacuum inlet latch.

Retaining

Post

Hook

Inlet Cover

Latch

PIVOT

HOW TO CONVERT UNIT F ROM

VACUUM USE TO BLOWER USE

1. Remove the vacuum tubes by inserting

the tip of a screwdriver into the latch area

of the vacuum inlet.

2. Gently tilt handle of screwdriver toward

the back of the unit to release the latch

while pulling up on the upper vacuum tube

with your other hand.

Latch Area

3. Remove the vacuum bag.

4. Close the vacuum inlet cover and make

sure it is latched closed.

5. Reinstall the blower tube (see BLOWER

TUBE ASSEMBLY).

SHOULDER STRAP ADJUSTMENT

1 Hold the unit as shown with the muffle r side

facing away from your body and clothes.

2. Pass the shoulder strap over your head

and onto your right shoulder.

3. Extend your left arm toward the rear of the

vacuum bag.

4. Adjust shoulder strap until the vacuum

bag/shoulder strap seam lies between

your thumb and index finger.

5. Make sure air flows freely from the elbow

tube into bag. If bag is kinked, the unit will

not operate properly.

1 2 3 4 5 6 7 8 9 10 11 12 13

Commentaires sur ces manuels

Pas de commentaire